Known as: sealing ring

View/Change Diagram

911 1994-98 - Fuel/Exhaust

911 1994-98 - Fuel/Exhaust

Known as: sealing ring

View/Change Diagram

911 1994-98 - Fuel/Exhaust

FVD spec. Billet 993gt2/993 turbo cylinder heads:

• interchangeable fit with GT2 & turbo standard cylinder head
• fully cnc machined from solid billet for maximum geometrical accuracy
• made from aerospace grade 2618 aluminum alloy, as commonly used for f1 & GT race pistons which has the highest possible material strength at elevated temperatures
• machined for 49.0 x 9.0 intake and 41.5 x 9.0 exhaust valves
• optimized combustion chamber reduces squish crevice volume - the effect of which increases chamber turbulence and results in higher flame speed, which improve's power, torque and efficiency.
• 15mm outside diameter sintered steel valve guides for reduced wear & improved valve support ...(choose a part on the right to read more)

General Fitment

Continuing on our modification path for the Porsche 997.2 turbo, agency power has just finished and released their new carbon fiber cold air intake kit. the carbon fiber airbox is a direct replacement for the OEM intake box. the airbox is made using a prepreg process which allows the entire airbox to be flawless from pulls. similar in shape to the OEM box for fitment, this carbon fiber unit features enlarged holes to fit dual K&N cone air filters. the 2x2 weave is finished in a gloss clear coat and sits nicely where the standard plastic box once was. These filters are pressed in through the rear of the intake box utilizing the rubber seal on the filter as a secure fit.

Each filter mates up to the factory...(choose a part on the right to read more)

General Fitment

FVD Brombacher997.1 tt ?700 series? Upgraded turbos

Facts:
- cnc re-profiled compressor housing and backing plate
- new, lightened and larger compressor wheel (12 blades)
- reworked turbine wheel, lightened and optimized for higher flow and reduced backpressure.
- all new bearings.
- all new piston rings and seals.
- all parts cleaned, inspected and measured to motorsport specifications.
- all parts are balanced (static & dynamic) up to 120.000 rpm with balancing protocol.
- 47.55 mm inducer
- 66 mm exducer
- flow rate = 37 lbs. / minute or 280g/s
- remanufactured by borg warner certified technicians
- shaft tolerances are strictly maintained to ensure durability
- free software update for tho...(choose a part on the right to read more)

General Fitment

FVD Brombacher997.1 tt ?700 series? Upgraded turbos

Facts:
- cnc re-profiled compressor housing and backing plate
- new, lightened and larger compressor wheel (12 blades)
- reworked turbine wheel, lightened and optimized for higher flow and reduced backpressure.
- all new bearings.
- all new piston rings and seals.
- all parts cleaned, inspected and measured to motorsport specifications.
- all parts are balanced (static & dynamic) up to 120.000 rpm with balancing protocol.
- 47.55 mm inducer
- 66 mm exducer
- flow rate = 37 lbs. / minute or 280g/s
- remanufactured by borg warner certified technicians
- shaft tolerances are strictly maintained to ensure durability
- free software update for tho...(choose a part on the right to read more)

General Fitment

FVD Brombacher997.1 tt "700 series" upgraded turbos facts: - cnc re-profiled compressor housing and backing plate - new, lightened and larger compressor wheel (12 blades) - reworked turbine wheel, lightened and optimized for higher flow and reduced backpressure. - all new bearings. - all new piston rings and seals. - all parts cleaned, inspected and measured to motorsport specifications. - all parts are balanced (static & dynamic) up to 120.000 rpm with balancing protocol. - 47.55 mm inducer - 66 mm exducer - flow rate = 37 lbs. / minute or 280g/s - remanufactured by borg warner certified technicians - shaft tolerances are strictly maintained to ensure durability - free software update for those already runn...(choose a part on the right to read more)

General Fitment

FVD Brombacher997.1 tt "700 series" upgraded turbos facts: - cnc re-profiled compressor housing and backing plate - new, lightened and larger compressor wheel (12 blades) - reworked turbine wheel, lightened and optimized for higher flow and reduced backpressure. - all new bearings. - all new piston rings and seals. - all parts cleaned, inspected and measured to motorsport specifications. - all parts are balanced (static & dynamic) up to 120.000 rpm with balancing protocol. - 47.55 mm inducer - 66 mm exducer - flow rate = 37 lbs. / minute or 280g/s - remanufactured by borg warner certified technicians - shaft tolerances are strictly maintained to ensure durability - free software update for those already runn...(choose a part on the right to read more)

General Fitment

FVD Brombacher997.1 tt "700 series" upgraded turbos facts: - cnc re-profiled compressor housing and backing plate - new, lightened and larger compressor wheel (12 blades) - reworked turbine wheel, lightened and optimized for higher flow and reduced backpressure. - all new bearings. - all new piston rings and seals. - all parts cleaned, inspected and measured to motorsport specifications. - all parts are balanced (static & dynamic) up to 120.000 rpm with balancing protocol. - 47.55 mm inducer - 66 mm exducer - flow rate = 37 lbs. / minute or 280g/s - remanufactured by borg warner certified technicians - shaft tolerances are strictly maintained to ensure durability - free software update for those already runn...(choose a part on the right to read more)

FVD Brombacher997.1 tt "700 series" upgraded turbos facts: - cnc re-profiled compressor housing and backing plate - new, lightened and larger compressor wheel (12 blades) - reworked turbine wheel, lightened and optimized for higher flow and reduced backpressure. - all new bearings. - all new piston rings and seals. - all parts cleaned, inspected and measured to motorsport specifications. - all parts are balanced (static & dynamic) up to 120.000 rpm with balancing protocol. - 47.55 mm inducer - 66 mm exducer - flow rate = 37 lbs. / minute or 280g/s - remanufactured by borg warner certified technicians - shaft tolerances are strictly maintained to ensure durability - free software update for those already runn...(choose a part on the right to read more)

FVD Brombacher957 Cayenne turbo tt ihi ?16/24? ?700 series? Upgraded turbos.

Specifications:
- new, lightened and larger billet compressor wheel with state of the art ?extended tip?. ( 46.5 mm inducer).
- these turbos are the ihi size equivalent to the kkk 16/24 ? As a reference.
- cnc re-profiled compressor housing and backplate.
- optimized clearances.
- re-uses factory vacuum unit (wastegates).**
- up to 50% more power compared to the factory turbo?s!
- all new bearings.
- all new piston rings and seals.
- all parts cleaned, inspected and measured to motorsport specifications.
- all parts are balanced (static & dynamic) up to 120.000 rpm with balancing protocol.
- remanufactured by ihi certif...(choose a part on the right to read more)

General Fitment

FVD Brombacher957 Cayenne turbo tt ihi ?16/24? ?700 series? Upgraded turbos.

Specifications:
- new, lightened and larger billet compressor wheel with state of the art ?extended tip?. ( 46.5 mm inducer).
- these turbos are the ihi size equivalent to the kkk 16/24 ? As a reference.
- cnc re-profiled compressor housing and backplate.
- optimized clearances.
- re-uses factory vacuum unit (wastegates).**
- up to 50% more power compared to the factory turbo?s!
- all new bearings.
- all new piston rings and seals.
- all parts cleaned, inspected and measured to motorsport specifications.
- all parts are balanced (static & dynamic) up to 120.000 rpm with balancing protocol.
- remanufactured by ihi certif...(choose a part on the right to read more)

General Fitment

We recommend replacing your exhaust gaskets each time you remove your exhaust. If you reuse an old gasket, odds are it will leak and create noise or fill the cabin with noxious fumes. Sold individually. Simplify your exhaust installation with one of our pre-packaged installation kits. Find them under exhaust -> gaskets / installation kits please note: this gasket only fits the bischoff flange. Please check which flanges you have prior to placing your order.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

View/Change Diagram

911 1978-83 - Engine	911 1978-83 - Fuel/Exhaust
911 1978-83 - Fuel/Exhaust	911 1984-86 - Engine
911 1984-86 - Fuel/Exhaust	911 1984-86 - Fuel/Exhaust
911 1987-89 - Engine	911 1987-89 - Fuel/Exhaust
911 1987-89 - Fuel/Exhaust	930 1975-77 - Engine
911 1989-94 - Engine	911 1989-94 - Fuel/Exhaust
911 1994-98 - Engine	911 1994-98 - Fuel/Exhaust
911 1994-98 - Fuel/Exhaust

This sealing ring is used to connect the wastegate pipe, part # 93012303100 to the muffler. High-quality OEM replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

View/Change Diagram

911 1978-83 - Engine	911 1978-83 - Fuel/Exhaust
911 1978-83 - Fuel/Exhaust	911 1984-86 - Engine
911 1987-89 - Engine	930 1975-77 - Engine
930 1975-77 - Fuel/Exhaust	924 1980-85 - Fuel/Exhaust
924 1980-85 - Fuel/Exhaust	944 1985-88 - Fuel/Exhaust
944 1989-91 - Fuel/Exhaust

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

View/Change Diagram

911 Turbo/GT2 2007-09 - Fuel/Exhaust	911 Turbo/GT2 2007-09 - Fuel/Exhaust
911 Turbo/GT2 2010-13 - Fuel/Exhaust	911 Turbo/GT2 2010-13 - Fuel/Exhaust

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

View/Change Diagram

944 1985-88 - Engine	944 1985-88 - Fuel/Exhaust
944 1985-88 - Fuel/Exhaust	944 1989-91 - Engine
944 1989-91 - Fuel/Exhaust	944 1989-91 - Fuel/Exhaust